4-1
TRBL
SHTG
Troubleshooting
YDIS
This manual contains the model-specific information. See the YDIS Instruction Manual for detailed
information.
Feature
The YDIS provides quicker detection and analysis of engine malfunctions.
By connecting your computer to the engine ECM of an outboard motor using the communication
cable, this software can be used to display sensor data and data stored in the engine ECM on the
computer monitor.
If this software is run on Microsoft Windows 2000, Windows XP, or Windows Vista, the information
can be displayed in colorful graphics. Also, the software can be operated using either a mouse or a
keyboard.
In addition, the data for the main functions (Diagnosis, Diagnosis record, Engine monitor, Data log-
ger, and Record of engine oil exchange) can be saved on a disk or printed out.
Hardware requirement
Make sure that your computer meets the following requirements before using this software.
Computer: IBM PC/AT compatible computer
Operating system: Microsoft Windows 2000, Windows XP, or Windows Vista
CPU:
Windows 2000: Pentium, 166 MHz or higher (Pentium, 233 MHz or higher
recommended)
Windows XP: Pentium, 300 MHz or higher (Pentium, 500 MHz or higher
recommended)
Windows Vista: Core family, 1.6 GHz or higher (Core family, 2.0 GHz or higher
recommended)
Memory:
Windows 2000: 64 MB or more (128 MB or more recommended)
Windows XP: 128 MB or more (256 MB or more recommended)
Windows Vista: 1 GB or more
Hard disk free space: 20 MB or more (40 MB or more recommended)
Drive: CD-ROM drive
Display: VGA (640 × 480 pixels) 256 or more colors
SVGA (800 × 600 pixels or more recommended) 256 or more colors
Mouse: Compatible with the operating systems mentioned previously
Communication port: RS232C (Dsub-9 pin) port, USB port
Printer: Compatible with the operating systems mentioned previously
To Next Page
Loading...
Need help?
General
