4-19
TRBL
SHTG
Troubleshooting
Troubleshooting the power unit (trouble code not detected)
Troubleshooting consists of the following 3 items:
Symptom 1: Specific trouble conditions
Symptom 2: Trouble conditions of an area or individual part
Cause: Trouble causes of symptom 2
— : Not applicable
Symptom 1: Engine does not crank.
Symptom 2 Cause Checking step
See
page
Starter motor does not
operate
Gear shift not in the N
position
Set the gear shift to the N position.
10-6
Blown fuse Check the fuse. 5-3
A-9
Starter relay malfunction Check the starter relay. 5-65
Engine start switch
malfunction
Check the engine start switch.
5-66
Neutral switch malfunction Check the remote control box. A-11
Short, open, or loose
connection in electric starting
system circuit
Measure the starter relay input voltage. 5-65
Check the wiring harness for
continuity.
A-9
Starter motor malfunction Disassemble and check the starter
motor.
5-69
Starter motor
operates, but the
engine does not crank
Stuck piston or crankshaft Disassemble and check the power
unit.
7-81
Stuck drive shaft Checking the drive shaft bushing. 9-20