1-5
SPEC
Specification
Lower unit
Bracket unit
Fuel and oil requirement
Item Unit
Model
F200BET FL200BET F250GET FL250GET
Gear shift positions F-N-R
Gear ratio 2.00 (30/15)
Reduction gear type Spiral bevel gear
Clutch type Dog clutch
Propeller shaft type Spline
Propeller direction (rear view)
Clock-
wise
Counter-
clockwise
Clock-
wise
Counter-
clockwise
Propeller mark T, M TL, ML T, M TL, ML
Item Unit
Model
F200BET FL200BET F250GET FL250GET
Trim angle
At 12° boat transom degree –3 to 16
Tilt-up angle degree 70
Steering angle degree 32 + 32
Trim and tilt system PTT
Item Unit
Model
F200BET FL200BET F250GET FL250GET
Fuel type Regular unleaded gasoline
Minimum fuel octane number RON 84 90
Engine oil 4-stroke motor oil
Engine oil grade (*1) (*2) API SE, SF, SG, SH, SJ, SL
SAE 5W-30, 10W-30, 10W-40
Total engine oil quantity (oil pan
capacity) (*3)
L (US qt,
Imp qt)
5.6 (5.92, 4.93)
Gear oil type Hypoid gear oil
Gear oil grade (*2)
API GL-4
SAE 90
Gear oil quantity
L (US qt,
Imp qt)
1.150
(1.216,
1.012)
1.000
(1.057,
0.880)
1.150
(1.216,
1.012)
1.000
(1.057,
0.880)
(*1) If the recommended engine oil grades are not available, use engine oil with an API classifica-
tion of SH, SJ, or SL and an SAE classification of 15W-40, 20W-40, or 20W-50.
(*2) Meeting both API and SAE requirements.
(*3) For actual engine oil amount required at periodical oil check, see “Power unit technical data”
(1-12).