Cisco NCS 2000 series Troubleshoot Manual

DETAILED STEPS
Step 1 To troubleshoot an FE condition, determine which node and card link directly to the card reporting the FE alarm. For
example, an FE condition on a card in Slot 12 of Node 1 could link to the main condition from a card in Slot 6 of Node
2.
Step 2 Log into the node that links directly to the card reporting the FE condition.
Step 3 Complete the Clear a BLSR External Switching Command, on page 448 procedure.
If the condition does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html
for more information or call Cisco TAC (1 800 553-2447).
FEC-MISM
Default Severity: Major (MJ), Service-Affecting (SA)
Logical Object: TRUNK
The Forward Error Correction (FEC) Mismatch alarm applies to all cards featuring FEC/E-FEC capability:
TXP_MR_10G, TXP_MR_10E, TXP_MR_10E_C, TXP_MR_10E_L, TXP_MR_2.5G, TXPP_MR_2.5G,
MXP_10G, MXP_MR_10E, ADM-10G, and OTU2_XP. FEC-MISMATCH is reported only on the card
configured in Standard FEC mode or with FEC disabled. A card configured in enhanced FEC mode will report
an OTUK-LOF , on page 343 alarm.
The alarm is related to ITU-T G.709 encapsulation and is only raised against a trunk port.
When the OUT2 client is directly connected with another OTU2 client with standard FEC and Disabled FEC
on either side, the FEC-MISM alarm is not raised on the 400G-XP-LC card. The Uncorrected FEC Word
condition is raised on the standard FEC side.
Clear the FEC-MISM Alarm
SUMMARY STEPS
1. In node view (single-shelf mode) or shelf view (multishelf mode), double-click the TXP_MR_10G,
TXP_MR_10E, TXP_MR_10E_C, TXP_MR_10E_L, TXP_MR_2.5G, TXPP_MR_2.5G, MXP_MR_10G,
MXP_MR_10E, ADM-10G, and OTU2_XP card.
2. Click the Provisioning > OTN > OTN Lines tabs.
3. In the FEC column, click Enable to activate the FEC feature. This causes a different OTN frame to be
transmitted. Alternately, in the E-FEC column (TXP_MR_10E and MXP_MR_10E), click Enable to
activate the Enhanced FEC feature.
4. Verify that the far-end card is configured the same way by repeating Step 1, on page 201 through Step 3,
on page 201.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
200
Alarm Troubleshooting
FEC-MISM

Cisco NCS 2000 series Specifications

General

Brand	Cisco
Model	NCS 2000 series
Category	Network Hardware
Language	English