Cisco NCS 2000 series Troubleshoot Manual

Clear the MAN-LASER-RESTART Condition
SUMMARY STEPS
1. Set the ALS Mode to a value different from Manual Restart or Manual Restart for test.
DETAILED STEPS
Set the ALS Mode to a value different from Manual Restart or Manual Restart for test.
If the condition does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html
for more information or call Cisco TAC (1 800 553-2447).
MAN-REQ
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: EQPT
The Manual Switch Request condition occurs when a user initiates a Manual switch request on an OC-N/STM-N
port. Clearing the Manual switch clears the MAN-REQ condition. You do not need to clear the switch if you
want the Manual switch to remain.
Clear the MAN-REQ Condition
SUMMARY STEPS
1. Complete the Initiate a 1+1 Manual Switch Command, on page 444 procedure.
DETAILED STEPS
Complete the Initiate a 1+1 Manual Switch Command, on page 444 procedure.
If the condition does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html
for more information or call Cisco TAC (1 800 553-2447).
MANRESET
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: EQPT
A User-Initiated Manual Reset condition occurs when you right-click a card in CTC and choose Reset.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
300
Alarm Troubleshooting
Clear the MAN-LASER-RESTART Condition

Cisco NCS 2000 series Specifications

General

Brand	Cisco
Model	NCS 2000 series
Category	Network Hardware
Language	English