Cisco NCS 2000 series Troubleshoot Manual

en/us/support/web/tsd-cisco-worldwide-contacts.html to obtain a directory of toll-free Technical Support numbers for
your country.
LIC-MISSING
Default Severity: Critical (CR), Service-Affecting (SA)
Logical Object: PORT
The License Missing (LIC-MISSING) alarm is raised when a valid license on the licensed port expires.
Clear the LIC-MISSING Alarm
SUMMARY STEPS
1. Procure and install a valid license for the port. For more information on installing a license, see the
Licensing Configuration guide.
DETAILED STEPS
Procure and install a valid license for the port. For more information on installing a license, see the Licensing Configuration
guide.
If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical Support
Website at http://www.cisco.com/c/en/us/support/index.html for more information or log into http://www.cisco.com/c/
en/us/support/web/tsd-cisco-worldwide-contacts.html to obtain a directory of toll-free Technical Support numbers for
your country.
LMP-FAIL
Default Severity: Minor (MN), Non-Service-Affecting (NSA)
Logical Object: GE
The Link Management Protocol Fail alarm is raised by the control card when an LMP control channel fails
or when there is a traffic engineering (TE) link correlation error. When the alarm is raised against a control
channel, it uses a control channel (CTRLx) AID. When the alarm is raised against a TE link, a TE link AID
(TLINKx) is used.
The alarm clears when the control channel or TE link is restored.
LMP-FAIL occurs independently of the condition hierarchy between LMP-SD, on page 256, LMP-SF, on
page 257, or LMP-UNALLOC, on page 259.
Note
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
254
Alarm Troubleshooting
LIC-MISSING

Cisco NCS 2000 series Specifications

General

Brand	Cisco
Model	NCS 2000 series
Category	Network Hardware
Language	English