Cisco NCS 2000 series Troubleshoot Manual

CHAPTER 3
Transient Conditions
This chapter gives a description, entity, Simple Network Management Protocol (SNMP) number, and trap for
each commonly encountered transient condition.
Alarms can occur even in those cards that are not explicitly mentioned in the Alarm sections. When an alarm
is raised, refer to its clearing procedure.
• Transients Indexed By Alphabetical Entry, on page 465
• Trouble Notifications, on page 468
• Transient Conditions, on page 469
Transients Indexed By Alphabetical Entry
alphabetically lists all transient conditions and their entity, SNMP number, and SNMP trap.
The Cisco Transport Controller (CTC) default alarm profile might contain conditions that are not currently
implemented but are reserved for future use.
Note
Table 17: Transient Condition Alphabetical Index
SNMP TrapSNMP NumberEntityTransient Condition
disableInactiveUser5270NEADMIN-DISABLE, on
page 469
disableInactiveClear5280NEADMIN-DISABLE-CLR,
on page 469
adminLockoutOfUser5040NEADMIN-LOCKOUT, on
page 469
adminLockoutClear5050NEADMIN-LOCKOUT-CLR,
on page 469
adminLogoutOfUser5020NEADMIN-LOGOUT, on
page 469
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
465

Cisco NCS 2000 series Specifications

General

Brand	Cisco
Model	NCS 2000 series
Category	Network Hardware
Language	English