Cisco NCS 2000 series Troubleshoot Manual

LOCKOUT-REQ (2R, EQPT, ESCON, FC, GE, ISC)
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Objects: 2R, EQPT, ESCON, FC, GE, ISC
The Lockout Switch Request on Facility or Equipment condition occurs in a Y-cable MXP or TXP client
protection group for the above-listed clients when a user initiates a lockout switch request. The condition is
raised when you lock traffic onto the working port with the Lock On command (thus locking it off the protect
port), or you lock it off the protect port with the Lock Out command. In either case, the protect port will show
Lockout of Protection, and the Conditions window will show the LOCKOUT-REQ condition.
A lockout prevents protection switching. Clearing the lockout again allows protection switching and clears
the LOCKOUT-REQ condition.
Clear the LOCKOUT-REQ (2R, EQPT, ESCON, FC, GE, ISC) Condition
SUMMARY STEPS
1. Complete the Clear a Lock-On or Lockout Command, on page 447 procedure.
DETAILED STEPS
Complete the Clear a Lock-On or Lockout Command, on page 447 procedure.
If the condition does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html
for more information or call Cisco TAC (1 800 553-2447).
LOCKOUT-REQ (TRUNK)
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: TRUNK
The Lockout Switch Request on Facility or Equipment condition occurs in an MXP or TXP trunk port splitter
protection group when you lock traffic onto the working port with the Lock On command (thus locking it off
the protect port), or lock it off the protect port with the Lock Out command. In either case, the protect port
will show Lockout of Protection, and the Conditions window will show the LOCKOUT-REQ condition.
A lockout prevents protection switching. Clearing the lockout again allows protection switching and clears
the LOCKOUT-REQ condition.
Clear the LOCKOUT-REQ (TRUNK) Condition
SUMMARY STEPS
1. Complete the Clear a Lock-On or Lockout Command, on page 447 procedure.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
263
Alarm Troubleshooting
LOCKOUT-REQ (2R, EQPT, ESCON, FC, GE, ISC)

Cisco NCS 2000 series Specifications

General

Brand	Cisco
Model	NCS 2000 series
Category	Network Hardware
Language	English