FRCDWKSWBK-NO-TRFSW
The Forced Switch Back to Working Resulted in No Traffic Switch (FRCDWKSWBK-NO-TRFSW) condition
occurs when you perform a Force Switch to the working port or card and the working port or card is already
active.
This transient condition might result in a Force Switch (Ring or Span) standing condition for a BLSR or
MS-SPRing.
FRCDWKSWPR-NO-TRFSW
The Forced Switch to Protection Resulted in No Traffic Switch (FRCDWKSWPR-NO-TRFSW) condition
occurs when you perform a Force Switch to the protect port or card, and the protect port or card is already
active.
This transient condition does not result in a standing condition.
INC-BOOTCODE
The INC-BOOTCODE (Incompatible Boot Code) condition occurs on the Cisco NCS 2015 chassis:
• When the line card with older boot code is inserted on slots 15 and 16
• When the line card with old boot code is inserted into a slot and the slot generates the same IP address
of an existing working card
• When the line cards with old boot code are inserted in the adjacent slots.
• When the two line cards are simultaenously inserted in duplicate IP slots.
Insert the line cards with old boot code in any slot between two and seven to update boot codes. This transient
condition does not result in a standing condition.
INTRUSION
The Invalid Login Username (INTRUSION) condition occurs when you attempt to log in with an invalid user
ID.
This transient condition does not result in a standing condition.
INTRUSION-PSWD
The Security Intrusion Attempt Detected (INTRUSION -PSWD) condition occurs when you attempt to log
in with an invalid password.
This transient condition does not result in a standing condition.
IOSCFG-COPY-FAIL
The Cisco IOS Config Copy Failed (IOSCFG-COPY-FAIL) condition occurs on ML-Series Ethernet cards
when the software fails to upload or download the Cisco IOS startup configuration file to or from an ML-Series
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
472
Transient Conditions
FRCDWKSWBK-NO-TRFSW
To Next Page
Loading...
Need help?
General
