Cisco NCS 2000 series Troubleshoot Manual

CHAPTER 4
Error Messages
This chapter lists the error messages for the Cisco NCS Platform. The error dialog box in Figure 22: Error
Dialog Box, on page 479 consists of three parts: the error title, error ID, and error message.
Figure 22: Error Dialog Box
• Error Messages Reference, on page 479
Error Messages Reference
Table 18: Error Messages, on page 479 gives a list of all error or warning message numbers, the messages,
and a brief description of each message. The table lists two types of messages: error messages (EID-nnnn)
and warning messages (WID-nnnn). Error messages are alerts that an unexpected or undesirable operation
has occurred that either indicates the risk of loss of traffic or an inability to properly manage devices in the
network. Warnings are alerts that the requested operation could lead to an error. Warnings are sometimes used
to convey important information.
The WSON error messages gives a list of all the WSON error messages and a brief description of each
message.
Table 18: Error Messages
DescriptionError/Warning MessageError/Warning
ID
The error ID is invalid.Invalid error ID.EID-0
Cisco Transport Controller (CTC)
encountered a null pointer in the area
described by the specified item.
A null pointer encountered in {0}.EID-1
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
479

Cisco NCS 2000 series Specifications

General

Brand	Cisco
Model	NCS 2000 series
Category	Network Hardware
Language	English