EasyManuals Logo

Cisco Nexus 3548 User Manual

Cisco Nexus 3548
556 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #104 background imageLoading...
Page #104 background image
84
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
clear ip ospf policy statistics
clear ip ospf policy statistics
To clear policy statistics for Open Shortest Path First (OSPF), use the clear ip ospf policy statistics
command.
clear ip ospf [instance-tag] policy statistics {area area-id filter-list {in | out} | redistribute {bgp
autonomous-system | direct | eigrp id | ospf id | rip id | static}} [vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
instance-tag (Optional) Instance tag. Specify as an alphanumeric string of up to 20
characters.
area Clears policy statistics for an area.
area-id Area ID as an integer or IP address.
filter-list Specifies the policy statistics for filtered prefixes between OSPF areas.
in Filters prefixes sent into this OSPF area.
out Filters prefixes sent from this OSPF area.
redistribution Clears OSPF route redistribution statistics.
bgp
autonomous-system
Specifies the autonomous system number for the Border Gateway
Protocol. Specify the autonomous system number as
x.y, where the
range is from 1 to 65535 for both x and y, or as a single integer, where
the range is from 1 to 65535.
direct Specifies directly connected routes.
eigrp id Specifies the autonomous system number for the Enhanced Interior
Gateway Protocol. Specify the id argument as any case-sensitive,
alphanumeric string.
ospf id Specifies the Open Shortest Path First version 2 instance. Specify the id
argument as any case-sensitive, alphanumeric string.
rip id Specifies the Routing Information Protocol instance. Specify the id
argument as any case-sensitive, alphanumeric string.
static Specifies static routes.
vrf vrf-name (Optional) Specifies the name of the OSPF virtual routing and
forwarding (VRF) instance. The vrf-name argument can be any
alphanumeric string of up to 32 characters, except “default” and “all”.
Release Modification
5.0(3)A1(1) This command was introduced.

Table of Contents

Other manuals for Cisco Nexus 3548

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Nexus 3548 and is the answer not in the manual?

Cisco Nexus 3548 Specifications

General IconGeneral
Rack Units1RU
Product TypeSwitch
Form FactorRack-mountable
Jumbo Frame Support9216 bytes
Input Voltage100-240 VAC
Product SeriesNexus 3000
ModelNexus 3548
Operating SystemCisco NX-OS
Ports48 x 10GE SFP+
Latency190 ns
AirflowFront-to-back

Related product manuals