Cisco Nexus 3548 User Manual

457
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip community-list
show ip community-list
To display community lists for the Border Gateway Protocol (BGP), use the show ip community-list
command.
show ip community-list [name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the community lists:
switch(config)# show ip community-list
Related Commands
name (Optional) Name of the community list. The name can be any case-sensitive,
alphanumeric string up to 63 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
ip community-list Configures a BGP community list.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back