Cisco Nexus 3548 User Manual

446
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip bgp nexthop
show ip bgp nexthop
To display Border Gateway Protocol (BGP) next-hop information, use the show ip bgp nexthop
command.
show ip bgp nexthop addr [vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the BGP next-hop information:
switch(config)# show ip bgp nexthop 192.0.2.1
Related Commands
addr IPv4 address. The format is x.x.x.x
vrf vrf-name (Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show ip bgp neighbors Displays BGP neighbor information.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back