Cisco Nexus 3548 User Manual

292
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
protocol shutdown (OSPF)
protocol shutdown (OSPF)
To shut down an Open Shortest Path First (OSPF) instance without removing the configuration, use the
protocol shutdown command. To disable this function, use the no form of this command.
protocol shutdown
no protocol shutdown
Syntax Description This command has no arguments or keywords.
Command Default The OSPF instance is enabled by default when configured.
Command Modes Router configuration mode
Router VRF configuration mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to disable OSPF 209:
switch# configure terminal
switch(config) router ospf 209
switch(config-router)# protocol shutdown
switch(config-router)#
Related Commands
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show running-config
ospf
Displays the running configuration for OSPF version 2.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back