Cisco Nexus 3548 User Manual

307
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
restart eigrp
restart eigrp
To restart an Enhanced Interior Gateway Routing Protocol (EIGRP) instance and remove all associated
neighbors, use the restart eigrp command.
restart eigrp instance-tag
Syntax Description
Command Default None
Command Modes Global configuration mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to restart the OSPFv2 instance and remove all neighbors:
switch# configure terminal
switch(config)# restart eigrp Test1
switch(config)#
Related Commands
instance-tag Name for an EIGRP routing instance. The name can be a maximum
of 20 alphanumeric characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
copy running-config
startup-config
Saves the configuration in the startup configuration file.
show ip eigrp
interfaces
Displays information about EIGRP interfaces.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back