Cisco Nexus 3548 User Manual

475
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip ospf
show ip ospf
To display general information about Open Shortest Path First (OSPF) routing instances, use the show
ip ospf command.
show ip ospf [instance-tag] [vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines Use the show ip ospf command to display information about one or more OSPF instances.
This command requires the LAN Enterprise Services license.
Examples This example shows how to display information all about OSPF instances:
switch# show ip ospf
This example shows how to display information about one specific OSPF instance:
switch# show ip ospf 201
Related Commands
instance-tag (Optional) Name of the OSPF instance. Use this tag to display OSPF
information about a specific OSPF instance. The instance-tag
argument can be any alphanumeric string of 20 characters.
vrf vrf-name (Optional) Specifies the name of the virtual routing and forwarding
(VRF) instance. The vrf-name argument can be specified as any
case-sensitive, alphanumeric string up to 32 characters. The strings
“default” and “all” are reserved VRF names.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show running-config
ospf
Displays the OSPF running configuration.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back