Cisco Nexus 3548 User Manual

438
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip bgp community exact-match
show ip bgp community exact-match
To display routes that matches a specific Border Gateway Protocol (BGP) community, use the show ip
bgp community exact-match command.
show ip bgp community community-number exact-match [vrf {vrf-name | all}]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the routes that have exactly the same specified BGP communities:
switch# show ip bgp community 201 exact-match
Related Commands
community-number Community number. Valid value is a community number in the range from
1 to 4294967200, or AA:NN (autonomous system-community
number/2-byte number).
vrf vrf-name (Optional) Specifies the virtual routing and forwarding (VRF) instance. The
name can be any case-sensitive, alphanumeric string up to 32 characters.
all (Optional) Specifies all VRF instances.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
set community Sets the attributes for BGP communities.
show ip bgp
community
Displays the BGP routes that match a community list.
show ip bgp
community-list
Displays BGP routes that are permitted by the BGP community list.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back