Cisco Nexus 3548 User Manual

xv
Cisco Nexus 3548 NX-OS Unicast Routing Command Reference
OL-27852-01
New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus
3548 NX-OS Unicast Routing Command Reference. The latest version of this document is available at
the following Cisco website:
http://www.cisco.com/en/US/products/ps11541/tsd_products_support_series_home.html
To check for additional information about this Cisco NX-OS Release, see the Cisco Nexus 3548 Switch
Release Notes available at the following Cisco website:
http://www.cisco.com/en/US/products/ps11541/prod_release_notes_list.html
Table 1 summarizes the new and changed features for Cisco NX-OS Release 6.x and tells you where they
are documented.
Table 1 New and Changed Information
Feature Description
Changed in
Release Where Documented
BGP Additional Path
commands
Added description for several new
commands in support of BGP Additional
Path features.
6.0(2)A1(1) additional-paths receive
additional-paths selection
additional-paths send
capability additional-paths receive
capability additional-paths send
set path-selection all advertise

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back