Cisco Nexus 3548 User Manual

126
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
feature eigrp
feature eigrp
To enable the Enhanced Interior Gateway Protocol (EIGRP), use the feature eigrp command. To disable
EIGRP, use the no form of this command.
feature eigrp
no feature eigrp
Syntax Description This command has no arguments or keywords.
Command Default Disabled
Command Modes Global configuration mode
Command History
Usage Guidelines You must enable the EIGRP feature before you can configure EIGRP.
This command requires the LAN Base Services license.
Examples This example shows how to enable the EIGRP feature:
switch# configure terminal
switch(config)# feature eigrp
switch(config)#
This example shows how to disable the EIGRP feature:
switch# configure terminal
switch(config)# no feature eigrp
switch(config)#
Related Commands
Release Modified
5.0(3)A1(1) This command was introduced.
Command Description
show feature Displays the features enabled on the switch.
show ip eigrp Displays EIGRP configuration information.
router eigrp Creates an EIGRP instance.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back