Cisco Nexus 3548 User Manual

452
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip bgp prefix-list
show ip bgp prefix-list
To display Border Gateway Protocol (BGP) routes that match a prefix list, use the show ip bgp
prefix-list command.
show ip bgp prefix-list list-name [exact-match] [vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display routes that match a prefix list:
switch(config)# show ip bgp prefix-list test1
Related Commands
list-name Name of a prefix list. The commlist-name can be any case-sensitive, alphanumeric
string up to 63 characters.
exact-match (Optional) Displays an exact match of the filter.
vrf vrf-name (Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
maximum-prefix Controls the number of prefixes that can be received from a BGP neighbor.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back