411
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show bgp extcommunity
show bgp extcommunity
To display Border Gateway Protocol (BGP) routes that match an extended community, use the show bgp
extcommunity command.
show bgp {{ip | ipv4} {unicast | multicast}} extcommunity 4byteas-generic {non-transitive |
transitive} [as4-number] [exact-match] [vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the routes that match an extended community:
switch# show bgp ip unicast extcommunity 4byteas-generic transitive 1.3:30
Related Commands
ip Displays BGP information for the IPv4 address family.
ipv4 Displays BGP information for the IPv4 address family.
unicast Displays BGP information for the unicast address family.
multicast Displays BGP information for the multicast address family.
4byteas-generic Displays the routes that match the generic specifice extended communities.
non-transitive Displays the routes that match the nontransitive extended communities.
transitive Displays the routes that match the transitive extended communities.
as4-number AS number. The as4-number is a 32-bit integer in the form of a plaintext integer
or <higher 16-bit decimal number>.<lower 16-bit decimal number> .
exact-match (Optional) Displays an exact match of the extended community.
vrf vrf-name (Optional) Specifies the virtual routing and forwarding (VRF) context name.
The name can be any case-sensitive, alphanumeric string up to 32 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
ip extcommunity-list Creates an extended community list.
To Next Page
Loading...
Need help?
General
