Cisco Nexus 3548 User Manual

412
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show bgp extcommunity-list
show bgp extcommunity-list
To display Border Gateway Protocol (BGP) routes that match an extended community list, use the show
bgp extcommunity-list command.
show bgp {{ip | ipv4} {unicast | multicast}} extcommunity-list commlist-name [exact-match]
[vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the routes that match a community list:
switch# show bgp ipv4 unicast extcommunity-list test1
Related Commands
ip Displays BGP information for the IPv4 address family.
ipv4 Displays BGP information for the IPv4 address family.
unicast Displays BGP information for the unicast address family.
multicast Displays BGP information for the multicast address family.
commlist-name Name of an extended community-list. The commlist-name can be any case-sensitive,
alphanumeric string up to 63 characters.
exact-match (Optional) Displays an exact match of the extended communities.
vrf vrf-name (Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
ip extcommunity-list Creates an extended community list.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back