Cisco Nexus 3548 User Manual

485
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip ospf policy statistics area
show ip ospf policy statistics area
To display Open Shortest Path First (OSPF) policy statistics for an area, use the show ip ospf policy
statistics area command.
show ip ospf [instance-tag] policy statistics area area-id filter-list {in | out} [vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines Use the show ip ospf policy statistics area command to display information about the filter lists applied
to an area.
This command requires the LAN Enterprise Services license.
Examples This example shows how to display policy statistics for OSPF:
switch# show ip ospf policy statistics area 201 filter-list in
Related Commands
instance-tag (Optional) Name of the OSPF instance. Specify as an alphanumeric string.
area area-id Specifies the area number used to define the particular area. The area ID can
be an IP address or a number from 0 to 4294967295.
filter-list Filters prefixes between OSPF areas.
in Displays policy statistics for incoming routes.
out Displays policy statistics for outgoing routes.
vrf vrf-name (Optional) Specifies the name of the virtual routing and forwarding (VRF)
instance. The vrf-name argument can be specified as any case-sensitive,
alphanumeric string up to 32 characters. The strings “default”,
“management”, and “all” are reserved VRF names.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
area filter-list (OSPF) Filters incoming or outgoing Network Summary (type 3) link-state
advertisements (LSAs) on an Area Border Router (ABR).

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back