Cisco Nexus 3548 User Manual

427
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip adjacency
show ip adjacency
To display adjacency information, use the show ip adjacency command.
show ip adjacency [ip-addr | interface] [detail] [non-best] [statistics] [summary] [vrf {vrf-name
| all | default | management}]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines The counter values in the output of show ip adjacency {statistics | detail} command are cleared after
a supervisor module switchover.
This command does not require a license.
Examples This example shows how to display a summary of the adjacency information:
switch# show ip adjacency summary
Related Commands
ip-addr (Optional) IPv4 source address. The format for IPv4 is x.x.x.x.
interface (Optional) Interface. Use ? to determine the supported interface types.
detail (Optional) Displays detailed adjacency information.
non-best (Optional) Displays both the best and nonbest adjacency information.
statistics (Optional) Displays adjacency statistics.
summary (Optional) Displays a summary of the adjacency information.
vrf vrf-name (Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
all (Optional) Displays adjacency statistics for all VRF entries.
default (Optional) Displays adjacency statistics for the default VRF.
management (Optional) Displays adjacency statistics for the management VRF.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show forwarding
adjacency
Displays forwarding adjacency information.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back