Cisco Nexus 3548 User Manual

71
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
clear ip bgp
clear ip bgp
To clear Border Gateway Protocol (BGP) routes from the BGP table, use the clear ip bgp command.
clear ip bgp {ipv4 {unicast | multicast} | all} {neighbor | * | as-number | peer-template name |
prefix} [vrf vrf-name | all | default | management]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to clear all BGP entries for the IPv4 address family:
switch# clear ip bgp *
ipv4 (Optional) Clears BGP information for the IPv4 address family.
unicast Clears BGP information for the unicast address family.
multicast Clears BGP information for the multicast address family.
all Clears the BGP information for all address families.
neighbor Network address. The format is A.B.C.D for IPv4.
* Clears all BGP routes.
as-number Autonomous system (AS) number. The range is from 1 to 65535.
peer-template name Specifies a BGP peer template. The name can be any case-sensitive,
alphanumeric string up to 63 characters.
prefix Prefix from the selected address family. The format is
A.B.C.D/length for IPv4.
vrf vrf-name (Optional) Specifies a particular VPN routing and forwarding (VRF)
instance. The VRF name can be any case-sensitive, alphanumeric
string up to 32 characters.
all (Optional) Clears the BGP information from all VRF entries.
default (Optional) Clears the BGP information from the default VRF.
management (Optional) Clears the BGP information from the management VRF.
Release Modification
5.0(3)A1(1) This command was introduced.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back