Cisco Nexus 3548 User Manual

409
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show bgp community
show bgp community
To display Border Gateway Protocol (BGP) routes that match a community, use the show bgp
community command.
show bgp {{ip | ipv4} {unicast | multicast}} community [as-number] no-advertise] [no-export]
[no-export-subconfed] [exact-match]} [vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the routes that match a community:
switch# show bgp ip multicast community no-advertise
Related Commands
ip Displays BGP information for the IPv4 address family.
ipv4 Displays BGP information for the IPv4 address family.
unicast Displays BGP information for the unicast address family.
multicast Displays BGP information for the multicast address family.
as-number (Optional) AS number. The AS number can be a 16-bit integer or a 32-bit
integer in the form of <higher 16-bit decimal number>.<lower 16-bit decimal
number>.
no-advertise (Optional) Displays the no-advertise community.
no-export (Optional) Displays the no-export community.
no-export-subconfed (Optional) Displays the no-export-subconfed community.
exact-match (Optional) Displays an exact match of the community.
vrf vrf-name (Optional) Specifies the virtual routing and forwarding (VRF) instance. The
name can be any case-sensitive, alphanumeric string up to 32 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
ip community-list Creates a community list.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back