Cisco Nexus 3548 User Manual

525
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show sockets statistics
show sockets statistics
To display the socket statistics, use the show sockets statistics command.
show sockets statistics [all | raw | rawsum | tcp | tcpsum | udp | udpsum]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the TCP socket statistics:
switch# show sockets statistics tcp
Related Commands
all (Optional) Displays all the socket statistics.
raw (Optional) Displays the socket statistics for the raw IPv4 protocol socket statistics.
rawsum (Optional) Displays a summary of the socket statistics for the raw IPv4 protocol
socket statistics.
tcp (Optional) Displays the socket statistics for the TCP IPv4 protocol.
tcpsum (Optional) Displays a summary of the socket statistics for the TCP IPv4 protocols.
udp (Optional) Displays the socket statistics for the UDP IPv4 protocol.
udpsum (Optional) Displays a summary of the socket statistics for the UDP IPv4 protocols.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
clear sockets statistics Clears socket statistics.
show sockets client Displays information about the socket client.
show sockets connection Displays information about the socket connection.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back