Cisco Nexus 3548 User Manual

420
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show forwarding distribution
show forwarding distribution
To display forwarding distribution information, use the show forwarding distribution command.
show forwarding distribution [clients | fib-state]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the forwarding information for unicast clients:
switch# show forwarding distribution clients
id pid shmem-start shmem-end shmem-name
-- ----- ----------- --------- ----------
1 4359 0x52330130 0x52380000 u6rib-ufdm
2 4360 0x59900130 0x59b00000 urib-ufdm
switch#
Related Commands
clients (Optional) Displays the forwarding distribution information for unicast clients.
fib-state (Optional) Displays the forwarding distribution state for unicast Forwarding
Information Base (FIB).
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show ip fib distribution Displays distribution information about the FIB.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back