Cisco Nexus 3548 User Manual

470
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip eigrp traffic
show ip eigrp traffic
To display the number of Enhanced Interior Gateway Routing Protocol (EIGRP) packets sent and
received, use the show ip eigrp traffic command.
show ip eigrp [instance-tag] traffic [vrf {vrf-name | all | default | management}]
Syntax Description
Command Default This command displays information for the default VRF if no VRF is specified.
Command Modes Any command mode
Command History
Usage Guidelines Use the show ip eigrp traffic command to find the number of packets sent and received by this EIGRP
instance.
In addition, this command is useful in determining whether packets from one node are not reaching the
neighboring node due to connectivity or configuration problems.
This command requires the LAN Enterprise Services license.
Examples This example shows how to display the EIGRP traffic statistics:
switch# show ip eigrp traffic
Related Commands
instance-tag (Optional) Name of the EIGRP instance. The instance tag can be any
case-sensitive, alphanumeric string up to 20 characters.
vrf vrf-name (Optional) Specifies the name of the virtual routing and forwarding
(VRF) instance. The vrf-name argument can be specified as any
case-sensitive, alphanumeric string up to 32 characters.
all (Optional) Specifies all VRF instances.
default (Optional) Specifies the default VRF.
management (Optional) Specifies the management VRF.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show running-config
eigrp
Displays EIGRP running configuration information.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back