Cisco Nexus 3548 User Manual

482
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip ospf lsa-content-changed-list
show ip ospf lsa-content-changed-list
To display a list of all link-state advertisements (LSAs) with changed content, use the show ip ospf
lsa-content-changed-list command.
show ip ospf lsa-content-changed-list neighbor-id {ethernet slot/port | loopback if_number |
port-channel number}
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display a list of LSAs that changed for Ethernet 2/1:
switch# show ip ospf lsa-content-changed-list 192.0.2.2 ethernet 2/1
Related Commands
neighbor-id Router ID for the neighbor in the format A.B.C.D or A:B::C:D.
ethernet slot/port Specifies the Ethernet interface and the slot number and port number. The slot
number is from 1 to 255, and the port number is from 1 to 128.
loopback if_number Specifies the loopback interface. The loopback interface number is from 0 to
1023.
port-channel number Specifies the EtherChannel interface and EtherChannel number. The range is
from 1 to 4096.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show running-config
ospf
Displays the OSPF running configuration.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back