Cisco Nexus 3548 User Manual

449
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip bgp peer-policy
show ip bgp peer-policy
To display Border Gateway Protocol (BGP) peer policy template information, use the show ip bgp
peer-policy command.
show ip bgp peer-policy name
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the BGP peer policy:
switch(config)# show ip bgp peer-policy test1
Related Commands
name Name of a BGP template. The name can be any case-sensitive, alphanumeric string
up to 80 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
inherit peer-policy Inherits a peer policy template for a neighbor.
template peer-policy Configures a peer policy template.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back