Cisco Nexus 3548 User Manual

63
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
clear bgp policy statistics neighbor
clear bgp policy statistics neighbor
To clear policy statistics for the Border Gateway Protocol (BGP) neighbor, use the clear bgp policy
statistics neighbor command.
clear bgp policy statistics neighbor prefix [default-originate | {filter-list | prefix-list |
route-map} {in | out}]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to clear policy statistics for an aggregate address:
switch# clear bgp policy statistics neighbor 192.0.2.1 filter-list in
Related Commands
prefix Neighbor address. The format is x.x.x.x.
default-originate (Optional) Clears policy statistics for the default originate policy.
filter-list Clears policy statistics for the neighbor filter list.
prefix-list Clears policy statistics for the neighbor prefix list.
route-map Clears policy statistics for the neighbor route map.
in (Optional) Clears inboud policy statistics.
out (Optional) Clears outbound policy statistics.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show bgp policy statistics Displays BGP policy statistics.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back