Cisco Nexus 3548 User Manual

490
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip ospf retransmission-list
show ip ospf retransmission-list
To display a list of all link-state advertisements (LSAs) waiting to be resent to neighbors, use the show
ip ospf retransmission-list command.
show ip ospf retransmission-list neighbor-id {ethernet slot/port | loopback if_number |
port-channel number}
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines Use the show ip ospf retransmission-list command to troubleshoot Open Shortest Path First (OSPF)
routing operations.
This command requires the LAN Enterprise Services license.
Examples This example shows how to display all LSAs waiting to be resent to neighbors:
switch# show ip ospf retransmission-list 192.0.2.11 ethernet 2/1
Related Commands
neighbor-id Router ID of the neighbor. Specify as an IP address.
ethernet slot/port (Optional) Specifies the Ethernet interface and the slot number and port
number. The slot number is from 1 to 255, and the port number is from 1 to
128.
loopback if_number (Optional) Specifies the loopback interface. The loopback interface number is
from 0 to 1023.
port-channel number (Optional) Specifies the EtherChannel interface and EtherChannel number.
The range is from 1 to 4096.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show running-config
ospf
Displays the OSPF running configuration.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back