494
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip ospf traffic
show ip ospf traffic
To display Open Shortest Path First (OSPF) traffic statistics, use the show ip ospf traffic command.
show ip ospf [instance-tag] traffic [ethernet slot/port | loopback if_number | port-channel
number] [vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines Use the show ip ospf traffic command to display traffic statistics for one or more OSPF instances.
This command requires the LAN Enterprise Services license.
Examples This example shows how to display OSPF traffic statistics for interface 1/5:
switch# show ip ospf traffic ethernet 1/5
Related Commands
instance-tag (Optional) Name of the OSPF instance. The name can be a maximum of 20
alphanumeric characters.
ethernet slot/port (Optional) Specifies the Ethernet interface and the slot number and port
number. The slot number is from 1 to 255, and the port number is from 1 to
128.
loopback if_number (Optional) Specifies the loopback interface. The loopback interface number is
from 0 to 1023.
port-channel number (Optional) Specifies the EtherChannel interface and EtherChannel number.
The range is from 1 to 4096.
vrf vrf-name (Optional) Specifies the name of the virtual routing and forwarding (VRF)
instance. The vrf-name argument can be specified as any case-sensitive,
alphanumeric string up to 32 characters. The strings “default”,
“management”, and “all” are reserved VRF names.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
clear ip ospf traffic Clears OSPF traffic statistics.
show running-config
ospf
Displays the OSPF running configuration information.
To Next Page
Loading...
Need help?
General
