Cisco Nexus 3548 User Manual

356
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
shutdown (EIGRP)
shutdown (EIGRP)
To shut down an instance of Enhanced Interior Gateway Routing Protocol (EIGRP) without removing
the configuration, use the shutdown command. To disable this function, use the no form of this
command.
shutdown
no shutdown
Syntax Description This command has no arguments or keywords.
Command Default Enabled
Command Modes Address family configuration mode
Router configuration mode
Router VRF configuration mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to disable eigrp 209:
switch# configure terminal
switch(config)# router eigrp 209
switch(config-router)# shutdown
switch(config-router)#
Related Commands
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
copy running-config
startup-config
Saves the configuration in the startup configuration file.
show ip eigrp
interfaces
Displays information about EIGRP interfaces.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back