Cisco Nexus 3548 User Manual

508
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show mac-list
show mac-list
To display the entries in a MAC list, use the show mac-list command.
show mac-list [name]
Syntax Description
Command Default No match values are defined.
Command Modes Global configuration mode
Command History
Usage Guidelines This command requires the LAN Services Services license.
Examples This example shows how to display information about the Red MAC list:
switch(config)# show mac-list Red
Related Commands
name (Optional) MAC list name. The name can be any case-sensitive,
alphanumeric string up to 32 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
mac-list Creates a MAC list.
match mac-list Matches a MAC address in a MAC list.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back