Cisco Nexus 3548 User Manual

523
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show sockets client
show sockets client
To display information about the sockets clients, use the show sockets client command.
show sockets client [pid id] [raw | tcp | udp] [detail]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the UDP socket client information:
switch# show sockets client udp
Related Commands
pid id (Optional) Displays the socket client information for a specific process. The id range
is from 1 to 65535.
raw (Optional) Displays information about the raw client.
tcp (Optional) Displays information about the TCP client.
udp (Optional) Displays information about the UDP client.
detail (Optional) Displays information about the detailed client.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
clear sockets statistics Clears socket statistics.
show sockets connection Displays information about the socket connection.
show sockets statistics Displays information about the socket statistics.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back