89
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
clear ip rip policy statistics redistribute
clear ip rip policy statistics redistribute
To clear policy statistics for routes redistributed into the Routing Information Protocol (RIP) topology
table, use the clear ip rip policy statistics redistribute command in any mode.
clear ip rip policy statistics redistribute {bgp id | direct | eigrp id | ospf id | static} [vrf vrf-name]
Syntax Description
Command Default This command has no default settings.
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to clear policy statistics for EIGRP:
switch# clear ip rip policy statistics redistribute eigrp 201
bgp Clears policy statistics for the Border Gateway Protocol (BGP).
direct Clears policy statistics for directly connected routes only.
eigrp Clears policy statistics for the Enhanced Interior Gateway Routing Protocol
(EIGRP).
ospf Clears policy statistics for the Open Shortest Path First (OSPF) protocol.
static Clears policy statistics for IP static routes.
id For the bgp keyword, an autonomous system number. The range for 2-byte
numbers is from 1 to 65535. The range for 4-byte numbers is from 1.0 to
65535.65535.
For the eigrp keyword, an EIGRP instance name from which routes are to
be redistributed. The value takes the form of a string. You can enter a
decimal number, but Cisco NX-OS stores it internally as a string.
For the ospf keyword, an OSPF instance name from which routes are to be
redistributed. The value takes the form of a string. You can enter a decimal
number, but Cisco NX-OS stores it internally as a string.
vrf vrf-name (Optional) Specifies a particular virtual routing and forwarding (VRF)
instance. The VRF name can be a maximum of 32 alphanumeric characters
and is case sensitive.
Release Modification
5.0(3)A1(1) This command was introduced.
To Next Page
Loading...
Need help?
General
