Cisco Nexus 3548 User Manual

459
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip eigrp accounting
show ip eigrp accounting
To display prefix accounting information for the Enhanced Interior Gateway Routing Protocol (EIGRP)
processes, use the show ip eigrp accounting command.
show ip eigrp [instance-tag] accounting [vrf {vrf-name | all | default | management}]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the EIGRP accounting information:
switch# show ip eigrp accounting
Related Commands
instance-tag (Optional) Name of the EIGRP instance. This option is available when a
virtual routing and forwarding (VRF) instance is not specified. The
instance tag can be any case-sensitive, alphanumeric string up to 20
characters.
vrf vrf-name (Optional) Specifies the name of the virtual routing and forwarding (VRF)
instance. The vrf-name argument can be specified as any case-sensitive,
alphanumeric string up to 32 characters.
all (Optional) Specifies all VRF instances.
default (Optional) Specifies the default VRF.
management (Optional) Specifies the management VRF.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show running-config
eigrp
Displays EIGRP running configuration information.
router eigrp Configures an EIGRP instance.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back