Cisco Nexus 3548 User Manual

125
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
feature bgp
feature bgp
To enable the Border Gateway Protocol (BGP), use the feature bgp command. To disable BGP, use the
no form of this command.
feature bgp
no feature bgp
Syntax Description This command has no arguments or keywords.
Command Default Disabled
Command Modes Global configuration mode
Command History
Usage Guidelines You must enable the BGP feature before you can configure BGP.
This command requires the LAN Enterprise Services license.
Examples This example shows how to enable a BGP configuration:
switch# configure terminal
switch(config)# feature bgp
switch(config)#
This example shows how to disable the BGP feature:
switch# configure terminal
switch(config)# no feature bgp
switch(config)#
Related Commands
Release Modified
5.0(3)A1(1) This command was introduced.
Command Description
show bgp Displays BGP configuration information.
show feature Displays the status of features on a switch.
router bgp Creates a BGP instance.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back