Cisco Nexus 3548 User Manual

460
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip eigrp interfaces
show ip eigrp interfaces
To display information about interfaces configured for the Enhanced Interior Gateway Routing Protocol
(EIGRP), use the show ip eigrp interfaces command.
show ip eigrp [instance-tag] interfaces [{ethernet slot/port | loopback if_number | port-channel
number | vlan vlan-id}] [brief] [vrf {vrf-name | all | default | management}]
Syntax Description
Command Default This command shows all interfaces for the default VRF if no VRF or no interface is specified.
Command Modes Any command mode
Command History
Usage Guidelines Use the show ip eigrp interfaces command to determine on which interfaces EIGRP is active and learn
information about EIGRP related to those interfaces.
If you specify an interface, only that interface is displayed. Otherwise, all interfaces on which EIGRP is
running are displayed.
If you specify an autonomous system, only the routing process for the specified autonomous system is
displayed. Otherwise, all EIGRP processes are displayed.
This command requires the LAN Enterprise Services license.
instance-tag EIGRP instance. The instance tag can be any case-sensitive, alphanumeric
string up to 20 characters.
ethernet slot/port Specifies the Ethernet interface and the slot number and port number. The
slot number is from 1 to 255, and the port number is from 1 to 128.
loopback if_number Specifies the loopback interface. The loopback interface number is from 0 to
1023.
port-channel number Specifies the EtherChannel interface and EtherChannel number. The range
is from 1 to 4096.
vlan vlan-id Specifies the VLAN interface. The range is from 1 to 4094.
brief (Optional) Displays a brief summary of EIGRP interface information.
vrf vrf-name (Optional) Specifies the name of the virtual routing and forwarding (VRF)
instance. The vrf-name argument can be specified as any case-sensitive,
alphanumeric string up to 32 characters.
all (Optional) Specifies all VRF instances.
default (Optional) Specifies the default VRF.
management (Optional) Specifies the management VRF.
Release Modification
5.0(3)A1(1) This command was introduced.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back