Cisco Nexus 3548 User Manual

506
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip static-route
show ip static-route
To display static routes from the unicast Routing Information Base (RIB), use the show ip static-route
command.
show ip static-route [vrf {vrf-name | all}]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the static routes:
switch(config)# show ip static-route
Related Commands
vrf vrf-name (Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
all (Optional) Specifies all virtual router contexts (VRF) name.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
ip route Configures a static route.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back