Cisco Nexus 3548 User Manual

454
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip bgp route-map
show ip bgp route-map
To display the Border Gateway Protocol (BGP) route maps from the BGP table, use the show ip bgp
route-map command.
show ip bgp route-map route-map-name [vrf {vrf-name | all}]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the BGP route maps from the BGP table:
switch(config)# show ip bgp route-map
Related Commands
route-map-name Route map name.
vrf vrf-name (Optional) Specifies the virtual router context (VRF) name. The name can
be any case-sensitive, alphanumeric string up to 32 characters.
all (Optional) Specifies all VRF instances.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
route-map Creates route maps.
clear ip bgp Clear BGP routes from the BGP table.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back