Cisco Nexus 3548 User Manual

97
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
confederation
confederation
To configure the confederation parameters for the Border Gateway Protocol (BGP), use the
confederation command.
confederation {identifier | peers} as-number
Syntax Description
Command Default None
Command Modes Router configuration mode
Router VRF mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to configure the confederation identifier:
switch# configure terminal
switch(config)# router bgp 65536.33
switch(config-router)# confederation identifier 65536.33
switch(config-router)#
Related Commands
identifier Sets the routing domain confederation autonomous system (AS) number.
peers Sets the peer AS numbers for a BGP confederation.
as-number Autonomous system number. The AS number can be a 16-bit integer or a 32-bit
integer in the form of <higher 16-bit decimal number>.<lower 16-bit decimal
number>.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show bgp Displays information about BGP.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back