Cisco Nexus 3548 User Manual

471
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip fib
show ip fib
To display forwarding information, use the show ip fib command.
show ip fib {adjacency | interfaces | route} module slot
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines Use the show ip fib command on the supervisor to view forwarding information on a module. Optionally,
you can use the attach module command to attach to a module and use the show ip fib command on the
module.
This command does not require a license.
Examples This example shows how to display the forwarding information for module 1:
switch# show ip fib route module 1
Related Commands
adjacency Displays the adjacency information.
interfaces Displays the forwarding information for interfaces on a module.
route Displays the forwarding information for routes on a module.
module slot Displays information for the module. The slot range depends on the hardware
platform.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show forwarding Displays information about the FIB.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back