Cisco Nexus 3548 User Manual

521
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show running-config eigrp
show running-config eigrp
To display the running configuration for the Enhanced Interior Gateway Routing Protocol (EIGRP) for
IPv4 networks, use the show running-config eigrp command.
show running-config eigrp
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the running configuration for EIGRP:
switch# show running-config eigrp
Related Commands
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
router ospf Creates an OSPF instance.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back