Cisco Nexus 3548 User Manual

455
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip bgp summary
show ip bgp summary
To display the status of all Border Gateway Protocol (BGP) connections, use the show ip bgp summary
command.
show ip bgp summary [vrf {vrf-name | all}]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the status of BGP connections:
switch(config)# show ip bgp summary
Related Commands
vrf vrf-name (Optional) Specifies the virtual router context (VRF) name. The name can
be any case-sensitive, alphanumeric string up to 32 characters.
all (Optional) Specifies all VRF instances.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
maximum-prefix Controls the number of prefixes that can be received from a BGP neighbor.
router bgp Assigns an autonomous system (AS) number to a router.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back