Cisco Nexus 3548 User Manual

448
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip bgp paths
show ip bgp paths
To display all the Border Gateway Protocol (BGP) paths in the database, use the show ip bgp paths
command.
show ip bgp paths
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the BGP paths in the database:
switch(config)# show ip bgp paths
Address Hash Refcount Metric Path
0x5a7f46bc 2001 1 0 i
switch(config)#
Related Commands
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
maximum-paths Controls the maximum number of parallel routes that the Border Gateway
Protocol (BGP) can support.
show ip bgp Displays the BGP table information.
show ip bgp neighbors Displays BGP neighbor information.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back