Club Car Precedent Maintenance And Service Manual

BODYANDTRIMTwo-Passenger-Canopy
4
TWO-PASSENGERCANOPYINSTALLATION
Figure4-16Two-PassengerCanopyInstallation
1.Putthecanopy(4)ontopofthefrontandrearcanopysupports(Figure4-16).Makesurethatthefrontsupports
arecorrectlypositionedbetweenthemoldedtabsontheundersideofthecanopy.Makesurethatthemolded
protrusionsattherearofthecanopyextendintothetopoftherearsupports.
2.Installthebolts(3),washers(2),andnuts(1).Tightenthehardwareto50lb·in(5.6N·m).
3.Installthebolts(8),washers(7),andnuts(6).Tightenthehardwareto50lb·in(5.6N·m).
TWO-PASSENGERCANOPYWITHVISAGEDISPLAYUNITREMOVAL
CAUTION
•Topreventdamagetothecanopy,donotremovethecanopysupportsfromthevehiclewithout
rstremovingthecanopy.
1.Removetheoverheadbaskets.SeeDisplayUnitOverheadBasket.
2.Removethenuts(1),washers(2),andbolts(3)fromeachfrontcanopystrut(Figure4-17,Page4-22).
2020Precedent,Villager2and4MaintenanceandServiceManualPage4-21

Club Car Precedent Specifications

General

Power Source	Electric
Batteries	Six 8-volt (Electric)
Brakes	Mechanical Drum
Seating Capacity	2
Overall Length	91.5 in
Overall Width	47 in
Range	Up to 30 miles (depending on conditions)
Frame	Aluminum
Suspension	Leaf spring (front and rear)
Tires	18 x 8.5-8
Payload Capacity	800 lb