Husqvarna TE 250 2010 Repair Manual

G.6 Part. N. 8000 H1489 (10-2009)
ENGINE OVERHAUL
Install the new guide from the top of the head using a suitable punch. Smear the
guide with oil before installation.
Ream the valve guide using a suitable reamer and lubricate with cutting uid.
Rotate the reamer when extracting it to avoid scoring the valve guide.
When a valve guide is changed, the valve seat must be refaced.
Check clearance again as outlined above.
Ret the sealing rings (1).
Valve

Husqvarna TE 250 2010 Specifications

General

Brand	Husqvarna
Model	TE 250 2010
Category	Motorcycle
Language	English